https://doi.org/10.3390/fluids9120303
Tauviqirrahman, M., Yohana, E., Cakranegara, J., Jamari, Setiyana, B.,
Analysis of the effect of cut sweep ratio of lily impeller on the distribution of dissolved oxygen | click to download
(2024) Fluids, 9(12), 303
https://doi.org/10.3390/w16192763
Tauviqirrahman, M., Akram, G.N., Muchammad, M.,
Effect of fine-pore aeration tube layout on dissolved oxygen distribution and aeration performance in large-scale pond | click to download
(2024) Water (Switzerland), 16(19), 2763
Tauviqirrahman, M., Wijaya, M., Muchammad, M., Paryanto, P., Jamari, J.,
Hydrodynamic lubrication analysis of journal bearing considering cavitation, slip and thermal condition | click to download
(2024) Jurnal Tribologi, 42, pp. 1 – 20
https://doi.org/10.1038/s41598-023-30725-6
Mohammad Tauviqirrahman , Muhammad Imam Ammarullah, J. Jamari, Eko Saputra, Tri Indah Winarni, Febri Dwi Kurniawan, Shidnan Amir Shiddiq & Emile van der Heide
Analysis of contact pressure in a 3D model of dual‑mobility hip joint prosthesis under a gait cycle | click to download
Scientific Reports (2023) 13:3564
https://doi.org/10.1080/23311916.2023.2213537
Mohammad Tauviqirrahman, P. Paryanto, Ben Oni Pugastri, Andreas Partogi Hamonangan, M. Muchammad, Eflita Yohana & J. Jamari
CFD analysis of hydrodynamic journal bearing with Bingham plastic lubricant considering roughness | click to download
Cogent Engineering, 10:1, 2213537
https://doi.org/10.1016/j.rineng.2023.101112
Mohammad Tauviqirrahman, Eflita Yohana, Paryanto, Jamari, Fauzan Syukri Muslim, Paulus Wisnu Anggoro
Investigation on acoustic, thermal, and tribological properties of hydrodynamic journal bearing with heterogeneous rough/smooth surface | click to download
Results in Engineering 18 (2023) 101112
https://doi.org/10.1016/j.rineng.2022.100844
Mohammad Tauviqirrahman, M. Muchammad, Tian Setiazi, Budi Setiyana, J. Jamari
Analysis of the effect of ventilation hole angle and material variation on thermal behavior for car disc brakes using the finite element method | click to download
Results in Engineering 17 (2023) 100844
HTTPS://DOI.ORG/10.1007/s40430-021-03314-9
Mohammad Tauviqirrahman, J. Jamari, Muhammad Bagir, Wahyu Caesarendra, P. Paryanto
Elastohydrodynamic behavior analysis on water‑lubricated journal bearing: a study of acoustic and tribological performance based on CFD‑FSI approach
Journal of the Brazilian Society of Mechanical Sciences and Engineering (2022) 44:1
HTTPS://DOI.ORG/10.3390/lubricants9090088
Tauviqirrahman M, Jamari J, Wicaksono AA, Muchammad M, Susilowati S, Ngatilah Y, Pujiastuti C.
CFD Analysis of Journal Bearing with a Heterogeneous Rough/Smooth Surface.
(2021) Lubricants, 9(9), art. no.88.
HTTPS://DOI.ORG/10.3390/fluids6020048
Tauviqirrahman, M., Afif, M.F., Paryanto, P., Jamari, J., Caesarendra, W.
Investigation of the tribological performance of heterogeneous slip/no-slip journal bearing considering thermo-hydrodynamic effects
(2021) Fluids, 6(2), art. no. 48
HTTPS://DOI.ORG/10.1016/j.biotri.2021.100177
Jamari, M. Tauviqirrahman, H.R. Husein, M. Muchammad
Effect of surface texturing on the performance of artificial hip joint for Muslim prayer (Salat) activity
(2021) Biotribology, 26, art. no. 100177
HTTPS://DOI.ORG/10.37934/arfmts.71.2.160169
Tauviqirrahman, M., Prahasto, T., Assaidiky, M.L., Muchammad
Numerical optimization of surface texture for hydrophobic textured slider bearing
(2020) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71(2), pp. 160-169
HTTPS://DOI.ORG/10.1007/s12206-019-0919-4
Tauviqirrahman, M., Ichsan, B.C., Jamari, Muchammad
Influence of roughness on the behavior of three-dimensional journal bearing based on fluid-structure interaction approach
(2019) Journal of Mechanical Science and Technology, 33 (10), pp. 4783-4790.
HTTPS://DOI.ORG/10.1063/1.5098231
Tauviqirrahman, M., Hilmy, F., Muchammad, Jamari, J.
Hydrodynamic performance of square shape textured parallel sliding contacts considering fluid-solid interfacial slip
(2019) AIP Conference Proceedings, 2097, art. no. 030056, .
HTTPS://DOI.ORG/10.24874/ti.2019.41.03.10
Tauviqirrahman, M., Pratama, A., Jamari, Muchammad
Hydrodynamic lubrication of textured journal bearing considering slippage: Two-dimensional CFD analysis using multiphase cavitation model
(2019) Tribology in Industry, 41 (3), pp. 401-415.
HTTPS://DOI.ORG/10.3390/lubricants7110097
Tauviqirrahman, M., Jamari, J., Wibowo, B.S., Fauzan, H.M., Muchammad, M.
Multiphase computational fluid dynamics analysis of hydrodynamic journal bearing under the combined influence of texture and slip
(2019) Lubricants, 7 (11), art. no. 97, .
HTTPS://DOI.ORG/10.3923/jeasci.2019.913.919
Tauviqirrahman, M., Sugiyanto, Yohana, E., Mulyadi, Jamari, Muchammad
Effect of spacing on flow field characteristic of tube artificial reefs with parallel formation by CFD
(2019) Journal of Engineering and Applied Sciences, 14 (3), pp. 913-919.
HTTPS://DOI.ORG/10.1063/1.5138268
Syaiful, Putra, P.A., Tauviqirrahman, M., Sinaga, N., Bae, M.-W.
Evaluation of thermal and hydraulic of air flow through perforated concave delta winglet vortex generators in a rectangular channel with field synergy principle
(2019) AIP Conference Proceedings, 2187, .
HTTPS://DOI.ORG/10.1088/1757-899X/694/1/012041
Purwanto, H., Dzulfikar, M., Tauviqirrahman, M., Ismail, R., Lestari, N.
The Effect of Tempering Temperature on Medium Carbon Steel Plate of Surface Hardening Result Using Induction Heating as Ballistic Resistant Material Study
(2019) IOP Conference Series: Materials Science and Engineering, 694 (1), art. no. 012041, .
HTTPS://DOI.ORG/10.1051/e3sconf/201912523001
Utama, Y.J., Setiyono, B., Jamari, Tauviqirrahman, M., Susanto, H.
Bibliometric Analysis of Publications in the Scopus Database: A Study at Diponegoro University during 2014-2018
(2019) E3S Web of Conferences, 125, art. no. 23001, .
HTTPS://DOI.ORG/10.1007/s40430-019-1890-9
Jamari, J., Muchammad, M., Hilmy, F., Tauviqirrahman, M.
Effect of inertia on the cavitation phenomena of hydrodynamic textured bearings considering slip
(2019) Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (9), art. no. 387, . Cited 1 time.
HTTPS://DOI.ORG/10.1063/1.5112486
Annanto, G.P., Jamari, Saputro, E., Bayuseno, A.P., Ismail, R., Tauviqirrahman, M., Anwar, I.B.
The effect of femoral head size on the cement mantle in the layered artificial hip joint
(2019) AIP Conference Proceedings, 2114, art. no. 060015, .
HTTPS://DOI.ORG/10.1088/1742-6596/1217/1/012014
Pratomo, A.W., Muhammad, Tauviqirrahman, M., Jamari, J., Bayuseno, A.P.
Analysis of non-newtonian lubricated textured contact for mixed slip/no-slip configuration considering cavitation
(2019) Journal of Physics: Conference Series, 1217 (1), art. no. 12014, .
HTTPS://DOI.ORG/10.1080/21681015.2019.1646327
Bawono, B., Anggoro, P.W., Bayuseno, A.P., Jamari, J., Tauviqirrahman, M.
Milling strategy optimized for orthotics insole to enhance surface roughness and machining time by Taguchi and response surface methodology
(2019) Journal of Industrial and Production Engineering, 36 (4), pp. 237-247.
HTTPS://DOI.ORG/10.1063/1.5098243
Susilowati, S., Hilmy, F., Arfiandani, D., Muchammad, Tauviqirrahman, M., Jamari, J.
Effect of eccentricity ratio on the hydrodynamic performance of journal bearing considering cavitation
(2019) AIP Conference Proceedings, 2097, art. no. 030068, .
HTTPS://DOI.ORG/10.4018/ijmmme.2019040104
Anggoro, P.W., Tauviqirrahman, M., Jamari, J., Bayuseno, A.P., Wibowo, J., Saputro, Y.D.
Optimal design and fabrication of shoe lasts for ankle foot orthotics for patients with diabetes
(2019) International Journal of Manufacturing, Materials, and Mechanical Engineering, 9 (2), pp. 62-80.
Anggoro, P.W., Bawono, B., Tauviqirrahman, M., Bayuseno, A.P., Jamari, J.
Design and manufacturing orthotics shoe insole with optimum surface roughness using the cnc milling
(2019) Journal of Engineering Science and Technology, 14 (4), pp. 1799-1819.
HTTPS://DOI.ORG/10.1016/j.matpr.2019.03.185
Bawono, B., Anggoro, P.W., Tauviqirrahman, M., Jamari, J., Bayuseno, A.P., Antony, T.A.Optimization parameters tooling design to increase the surface quality of orthotic insole shoes using the Taguchi approach and surface response methods
(2019) Materials Today: Proceedings, 13, pp. 47-52.
HTTPS://DOI.ORG/10.3923/jeasci.2019.106.113
Anggoro, P.W., Bawono, B., Tauviqirrahman, M., Jamari, J., Bayuseno, A.P., Wicaksono, A.
Reverse innovative design of insole shoe orthotic for diabetic patient
(2019) Journal of Engineering and Applied Sciences, 14 (1), pp. 106-113. Cited 1 time.
HTTPS://DOI.ORG/10.15282/jmes.13.3.2019.10.0436
Anggoro, P.W., Anthony, A.A., Bawono, B., Jamari, J., Bayuseno, A.P., Tauviqirrahman, M., Nugroho, A.
CNC milling of EVA foam with varying hardness for custom orthotic shoe insoles and process parameter optimization
(2019) Journal of Mechanical Engineering and Sciences, 13 (3), pp. 5347-5370.
HTTPS://DOI.ORG/10.1016/j.matpr.2019.03.232
Nasa Al Hakim, R.A., Edwan, A., Jamari, J., Ismail, R., Bayuseno, A., Tauviqirrahman, M., Kurdi, O., Saputra, E., Anwar, I.B., Dahlan, S.
Simulation load parameter on bipolar artificial hip joint using finite element method (FEM)
(2019) Materials Today: Proceedings, 13, pp. 305-310.
HTTPS://DOI.ORG/10.1088/1742-6596/1090/1/012068
Tauviqirrahman, M., Noorkarim, M.F., Arijanto, Muchammad
Numerical optimization of load support of the single textured lubricated contact with boundary slip
(2018) Journal of Physics: Conference Series, 1090 (1), art. no. 012068, .
HTTPS://DOI.ORG/10.1051/matecconf/201820404008
Tauviqirrahman, M., Muchammad, Akbar, R.A., Jamari
Influence of boundary slip layout on the hydrodynamic performance of partially textured journal bearing by CFD method
(2018) MATEC Web of Conferences, 204, art. no. 04008, .
HTTPS://DOI.ORG/10.1051/matecconf/201815902042
Tauviqirrahman, M., Kurniawan, B., Jamari
3D Numerical study on the effect of shaft eccentricity on the tribological performance of lubricated sliding contact
(2018) MATEC Web of Conferences, 159, art. no. 02042, .
HTTPS://DOI.ORG/10.1051/e3sconf/20187312005
Annanto, G.P., Saputra, E., Jamari, J., Bayuseno, A.P., Ismail, R., Tauviqirrahman, M., Anwar, I.B.
Numerical Analysis of Stress Distribution on Artificial Hip Joint Due to Jump Activity
(2018) E3S Web of Conferences, 73, art. no. 12005, .
HTTPS://DOI.ORG/10.1051/e3sconf/20187301022
Wicaksono, F.S., Towijaya, T., Saputra, E., Ismail, R., Tauviqirrahman, M., Jamari, J., Bayuseno, A.P.
Study of Sensor Deflection in Hip Simulator: Numerical and Experimental Method
(2018) E3S Web of Conferences, 73, art. no. 01022, .
HTTPS://DOI.ORG/10.1051/e3sconf/20187312013
Saputra, E., Jamari, J., Lie, H.A., Anwar, I.B., Ismail, R., Tauviqirrahman, M., Van Der Heide, E.
The Effect of Layer Variation between Liner and Cement Mantle on Reducing Cracks of PMMA Material Hip Joints
(2018) E3S Web of Conferences, 73, art. no. 12013, .
HTTPS://DOI.ORG/10.1051/e3sconf/20187312014
Al Hakim, R.A.N., Arrohman, S., Saputra, E., Anwar, I.B., Jamari, J., Ismail, R., Bayuseno, A.P., Tauviqirrahman, M.
The Contact Simulation Comparison of UHMWPE to the Crosslink Intensity Effect
(2018) E3S Web of Conferences, 73, art. no. 12014, .
HTTPS://DOI.ORG/10.1088/1742-6596/1090/1/012025
Ramdhani, S., Haryanto, I., Tauviqirrahman, M.
3D simulation of the lubrication film in journal bearing using Fluid-Structure Interaction (FSI)
(2018) Journal of Physics: Conference Series, 1090 (1), art. no. 012025, .
HTTPS://DOI.ORG/10.1088/1742-6596/1090/1/012066
Riyadi, S., Sulistyo, Tauviqirrahman, M.
Thermal analysis of composite disc-brake based on finite element method
(2018) Journal of Physics: Conference Series, 1090 (1), art. no. 012066, .
HTTPS://DOI.ORG/10.1088/1742-6596/1090/1/012042
Yohana, E., Ajie, W.K., Tauviqirrahman, M.
Numerical evaluation of number of textures in slip-textured lubricated contact
(2018) Journal of Physics: Conference Series, 1090 (1), art. no. 012042, .
HTTPS://DOI.ORG/10.1088/1742-6596/1090/1/012041
Hilmy, F., Muchammad, M., Tauviqirrahman, M., Jamari, J.
Inertia effect of textured lubricated contact on the bearing performance using CFD approach
(2018) Journal of Physics: Conference Series, 1090 (1), art. no. 012041, .
HTTPS://DOI.ORG/10.1088/1742-6596/1090/1/012027
Susilowati, Tauviqirrahman, M., Jamari, J., Bayuseno, A.P.
Effect of texture shape on the hydrodynamic lubrication performance of the sliding textured contact: A numerical approach
(2018) Journal of Physics: Conference Series, 1090 (1), art. no. 012027, . Cited 1 time.
HTTPS://DOI.ORG/10.1088/1742-6596/1090/1/012067
Muchammad, M., Hilmy, F., Tauviqirrahman, M., Jamari, J., Schipper, D.J.
CFD analysis of texture depth effect on the performance of hydrodynamic lubricated bearing
(2018) Journal of Physics: Conference Series, 1090 (1), art. no. 012067, .
HTTPS://DOI.ORG/10.1088/1742-6596/1090/1/012022
Muchammad, M., Sinaga, N., Yunianto, B., Arijanto, Noorkarim, M.F., Tauviqirrahman, M.
Optimization of texture of the multiple textured lubricated contact with slip
(2018) Journal of Physics: Conference Series, 1090 (1), art. no. 012022, .
HTTPS://DOI.ORG/10.1051/matecconf/201820404014
Muchammad, Yunianto, B., Tauviqirrahman, M., Wicaksono, W.A., Jamari
CFD analysis of partial slip effect on the performance of hydrodynamic lubricated journal bearings
(2018) MATEC Web of Conferences, 204, art. no. 04014, . Cited 1 time.
HTTPS://DOI.ORG/10.1051/matecconf/201820404006
Muchammad, Tauviqirrahman, M., Akbar, R.A., Hilmy, F., Jamari
The effect of textured surfaces on the hydrodynamic pressure generation in journal bearings
(2018) MATEC Web of Conferences, 204, art. no. 04006, .
HTTPS://DOI.ORG/10.1063/1.5028090
Setiadi, R., Munadi, Tauviqirrahman, M.
Numerical analysis for temperature profile of the closed house using computational fluid dynamics
(2018) AIP Conference Proceedings, 1941, art. no. 020032, .
HTTPS://DOI.ORG/10.1080/23311916.2018.1562319
Yohana, E., Tauviqirrahman, M., Putra, A.R., Diana, A.E., Choi, K.-H.
Numerical analysis on the effect of the vortex finder diameter and the length of vortex limiter on the flow field and particle collection in a new cyclone separator
(2018) Cogent Engineering, 5 (1), pp. 1-15. Cited 2 times.
HTTPS://DOI.ORG/10.21315/jps2018.29.s2.2
Muchammad, Syafa’at, I., Hilmy, F., Tauviqirrahman, M., Jamari
Wear analysis of spherical graphite cast iron using pin-on disc tribotester
(2018) Journal of Physical Science, 29, pp. 15-26.
HTTPS://DOI.ORG/10.1080/23311916.2018.1470916
Anggoro, P.W., Tauviqirrahman, M., Jamari, J., Bayuseno, A.P., Bawono, B., Avelina, M.M.
Computer-aided reverse engineering system in the design and production of orthotic insole shoes for patients with diabetes
(2018) Cogent Engineering, 5 (1), art. no. 1470916, . Cited 4 times.
HTTPS://DOI.ORG/10.1088/1757-899X/202/1/012097
Prasetyo, L., Tauviqirrahman, M., Rusnaldy
A Study of Chip Formation Feedrates of Various Steels in Low-Speed Milling Process
(2017) IOP Conference Series: Materials Science and Engineering, 202 (1), art. no. 012097, . Cited 2 times.
HTTPS://DOI.ORG/10.1063/1.4981184
Susilowati, Tauviqirrahman, M., Jamari, J., Bayuseno, A.P.
The beneficial effect of slip on the hydrodynamic lubrication in the lubricated sliding contact
(2017) AIP Conference Proceedings, 1831, art. no. 020043, .
HTTPS://DOI.ORG/10.1002/ls.1361
Muchammad, M., Tauviqirrahman, M., Jamari, J., Schipper, D.J.
An analytical approach on the tribological behaviour of pocketed slider bearings with boundary slip including cavitation
(2017) Lubrication Science, 29 (3), pp. 133-152. Cited 16 times.
HTTPS://DOI.ORG/10.1063/1.4968281
Jaenudin, Jamari, J., Tauviqirrahman, M.
Thermal analysis of disc brakes using finite element method
(2017) AIP Conference Proceedings, 1788, art. no. 030028, . Cited 2 times.
HTTPS://DOI.ORG/10.1063/1.4968321
Pratomo, A.W., Romadhon, R.R., Muchammad, Tauviqirrahman, M., Jamari, J., Bayuseno, A.P.
CFD analysis of artificial slippage and surface texturing in lubricated sliding contact considering cavitation
(2017) AIP Conference Proceedings, 1788, art. no. 030068, . Cited 1 time.
Atmaja, R., Munadi, Tauviqirrahman, M.
Stress analysis of lower limb exoskeleton for walking assistance using finite element method
(2017) International Journal of Applied Engineering Research, 12 (13), pp. 3864-3866. Cited 1 time.
HTTPS://DOI.ORG/10.2474/trol.12.67
Muchammad, Tauviqirrahman, M., Jamari, Schipper, D.J.
Numerical investigation of texturing and wall slip in lubricated sliding contact considering cavitation
(2017) Tribology Online, 12 (2), pp. 67-75. Cited 2 times.
Susilowati, S., Tauviqirrahman, M., Jamari, J., Bayuseno, A.P.
The beneficial effect of hydrophobic coating on the hydrodynamically lubricated bearing performance
(2017) International Journal of Applied Engineering Research, 12 (11), pp. 2969-2972.
Sugiyanto, Alhakim, B.P., Setiana, B., Ismail, R., Tauviqirrahman, M.
Stress analysis of four-bar linkage transfemoral prosthetic in gait cycle
(2017) International Journal of Applied Engineering Research, 12 (20), pp. 9333-9337.
Bawono, B., Anggoro, P.W., Tauviqirrahman, M., Jamari, J., Bayuseno, A.P.
Investigation of optimal proses parameters in CNC milling of insole shoe orthotic using taguchi- fuzzy approach
(2017) International Journal of Applied Engineering Research, 12 (19), pp. 8723-8726.
Anggoro, P.W., Saputra, E., Tauviqirrahman, M., Jamari, J., Bayuseno, A.P.
A 3-dimensional finite element analysis of the insole shoe orthotic for foot deformities
(2017) International Journal of Applied Engineering Research, 12 (15), pp. 5254-5260. Cited 7 times.
HTTPS://DOI.ORG/10.1504/IJSURFSE.2017.084669
Muchammad, M., Tauviqirrahman, M., Pratomo, A.W., Jamari, J., Schipper, D.J.
Theoretical investigation of boundary slip on the hydrodynamic lubrication performance in pocketed bearings including cavitation
(2017) International Journal of Surface Science and Engineering, 11 (2), pp. 100-117. Cited 1 time.
Yohana, E., Tony Suryo Utomo, M.S.K., Arisandhy, Y.A.W., Yulianto, E., Tauviqirrahman, M.
CFD analysis of dehumidification characteristics of cross flow dehumidifier with calcium chloride as liquid desiccant
(2017) International Journal of Applied Engineering Research, 12 (8), pp. 1671-1674.
Pratomo, A.W., Tauviqirrahman, M., Muchammad, M., Bayuseno, A.P., Jamari, J.
Comparison between non-Newtonian and Newtonian lubrication of journal bearing considering cavitation using CFD
(2017) International Journal of Applied Engineering Research, 12 (7), pp. 1190-1193.
Yohana, E., Utomo, M.S.K.T.S., Arisandhy, Y.A.W., Yulianto, E., Tauviqirrahman, M.
CFD analysis of dehumidification characteristics of cross flow dehumidifier with calcium chloride as liquid desiccant
(2017) International Journal of Applied Engineering Research, 12 (7), pp. 1138-1141.
HTTPS://DOI.ORG/10.1063/1.4945545
Tauviqirrahman, M., Bayuseno, A.P., Muchammad, M., Jamari, J.
Influence of superoleophobic layer on the lubrication performance of partially textured bearing including cavitation
(2016) AIP Conference Proceedings, 1725, art. no. 020091, .
HTTPS://DOI.ORG/10.1063/1.4945544
Tauviqirrahman, M., Muchammad, M., Bayuseno, A.P., Ismail, R., Saputra, E., Jamari, J.
Estimation of appropriate lubricating film thickness in ceramic-on-ceramic hip prostheses
(2016) AIP Conference Proceedings, 1725, art. no. 020090, .
HTTPS://DOI.ORG/10.21817/ijet/2016/v8i6/160806207
Tauviqirrahman, M., Muthik, B., Muchammad, M., Pratomo, A.W., Jamari, J.
Effect of cavitation modelling on the prediction of the lubrication performance using CFD: A case study of journal bearing lubricated with non-newtonian
(2016) International Journal of Engineering and Technology, 8 (6), pp. 2541-2546. Cited 2 times.
Tauviqirrahman, M., Ajie, W.K., Yohana, E., Muchammad, M., Jamari, J.
A study of slip position on improving the hydrodynamic lubrication performance of single-textured bearing using a mass conserving numerical approach
(2016) International Journal of Engineering and Technology, 8 (2), pp. 913-921. Cited 10 times.
HTTPS://DOI.ORG/10.21817/ijet/2016/v8i4/160804009
Yohana, E., Utomo, K.T.S., Ivantoro, T., Arifin, Z., Tauviqirrahman, M.
Effect of temperature and relative humidity on the performance of steamer using computational fluid dynamic (CFD)
(2016) International Journal of Engineering and Technology, 8 (4), pp. 1737-1749. Cited 1 time.
HTTPS://DOI.ORG/10.1051/matecconf/20165804001
Susilowati, Tauviqirrahman, M., Jamari, J., Bayuseno, A.P., Muchammad
A comparative study of finite journal bearing in laminar and turbulent regimes using CFD (computational fluid dynamic)
(2016) MATEC Web of Conferences, 58, art. no. 04001, . Cited 3 times.
HTTPS://DOI.ORG/10.1063/1.4945513
Prasetyo, Y., Tauviqirrahman, M., Rusnaldy
Prediction of 3D chip formation in the facing cutting with lathe machine using FEM
(2016) AIP Conference Proceedings, 1725, art. no. 020059, .
HTTPS://DOI.ORG/10.1063/1.4945482
Hidayat, R., Pranoto, S.E., Tauviqirrahman, M., Bayuseno, A.P.
Stress investigation on the rolling tires across the speed bump using finite element method
(2016) AIP Conference Proceedings, 1725, art. no. 020028, .
HTTPS://DOI.ORG/10.1063/1.4945512
Pranoto, S.E., Hidayat, R., Tauviqirrahman, M., Bayuseno, A.P.
Numerical analysis of tire/contact pressure using finite element method
(2016) AIP Conference Proceedings, 1725, art. no. 020058, .
HTTPS://DOI.ORG/10.1063/1.4945501
Muchammad, Tauviqirrahman, M., Pratomo, A.W., Jamari, J., Schipper, D.J.
The beneficial effect of superhydropobic layer addition on lubrication behavior in bearing application
(2016) AIP Conference Proceedings, 1725, art. no. 020047, .
HTTPS://DOI.ORG/10.1063/1.4945514
Pratomo, A.W., Muchammad, Tauviqirrahman, M., Jamari, Bayuseno, A.P.
Tribological characteristic enhancement effects by polymer thickened oil in lubricated sliding contacts
(2016) AIP Conference Proceedings, 1725, art. no. 020060, . Cited 2 times.
HTTPS://DOI.ORG/10.1063/1.4945502
Muchammad, Tauviqirrahman, M., Pratomo, A.W., Jamari, J., Schipper, D.J.
The effect of boundary slip and cavitation on hydrodynamic pressure generation in pocket bearings
(2016) AIP Conference Proceedings, 1725, art. no. 020048, .
HTTPS://DOI.ORG/10.1063/1.4945484
Jamari, J., Ismail, R., Anwar, I.B., Saputra, E., Tauviqirrahman, M., Heide, E.V.D.
Study the effect of surface texturing on the stress distribution of UHMWPE as a bearing material during rolling motion
(2016) AIP Conference Proceedings, 1725, art. no. 020030, . Cited 2 times.
HTTPS://DOI.ORG/10.1080/17515831.2016.1159781
Susilowati, S., Tauviqirrahman, M., Jamari, J., Bayuseno, A.P.
Numerical investigation of the combined effects of slip and texture on tribological performance of bearing
(2016) Tribology – Materials, Surfaces and Interfaces, 10 (2), pp. 86-89. Cited 5 times.
HTTPS://DOI.ORG/10.1080/17515831.2015.1133520
Pratomo, A.W., Muchammad, M., Tauviqirrahman, M., Jamari, J., Bayuseno, A.
Numerical investigation of pocketed slip slider bearing with non-Newtonian lubricant
(2016) Tribology – Materials, Surfaces and Interfaces, 10 (2), pp. 64-69. Cited 1 time.
HTTPS://DOI.ORG/10.4028/www.scientific.net/KEM.681.228
Ismail, R., Tauviqirrahman, M., Jamari, J., Schipper, D.J.
A method for characterizing running-in of sliding contacts
(2016) Key Engineering Materials, 681, pp. 228-233.
Kaliwantoro, N., Soesatyo, M.H.N.E., Indarto, Juffrie, M., Dharmastiti, R., Tauviqirrahman, M., Arifin, Z.
CFD simulation of plasma leakage and fluid flow on dengue virus infected-endothelial cells
(2016) ARPN Journal of Engineering and Applied Sciences, 11 (2), pp. 1021-1024.
HTTPS://DOI.ORG/10.1063/1.4938347
Tauviqirrahman, M., Muchammad, Ismail, R., Jamari, J.
Numerical analysis for cavitation flow of marine propeller
(2015) AIP Conference Proceedings, 1699, art. no. 050011, .
HTTPS://DOI.ORG/10.11113/jt.v76.5709
Kaliwantoro, N., Soesatyo, M.H.N.E., Indarto, Juffrie, M., Dharmastiti, R., Tauviqirrahman, M.
CFD characterization of flow pattern around endothelial cell in dengue infection with plasma leakage
(2015) Jurnal Teknologi, 76 (7), pp. 19-23.
HTTPS://DOI.ORG/10.11113/jt.v66.2701
Tauviqirrahman, M., Muchammad, Ismail, R., Jamari, Schipper, D.J.
Friction characteristics of liquid lubricated MEMS with deterministic boundary slippage
(2014) Jurnal Teknologi (Sciences and Engineering), 66 (3), pp. 75-80. Cited 3 times.
HTTPS://DOI.ORG/10.4028/www.scientific.net/AMM.493.426
Ismail, R., Saputra, E., Tauviqirrahman, M., Legowo, A.B., Anwar, I.B., Jamari, J.
Numerical study of salat movements for total hip replacement patient
(2014) Applied Mechanics and Materials, 493, pp. 426-431. Cited 10 times.
HTTPS://DOI.ORG/10.4028/www.scientific.net/AMR.911.210
Ismail, R., Prasetyo, D.I., Tauviqirrahman, M., Yohana, E., Bayuseno, A.P.
Induction hardening of carbon steel material: The effect of specimen diameter
(2014) Advanced Materials Research, 911, pp. 210-214. Cited 1 time.
HTTPS://DOI.ORG/10.4028/www.scientific.net/AMR.896.642
Ismail, R., Saputra, E., Tauviqirrahman, M., Jamari, J., Schipper, D.J.
Modeling of repeated rolling contact on rough surface: Surface topographical change
(2014) Advanced Materials Research, 896, pp. 642-645. Cited 1 time.
HTTPS://DOI.ORG/10.1016/j.triboint.2013.05.014
Tauviqirrahman, M., Ismail, R., Jamari, J., Schipper, D.J.
Combined effect of texturing and boundary slippage in lubricated sliding contacts
(2013) Tribology International, 66, pp. 274-281. Cited 26 times.
HTTPS://DOI.ORG/10.1016/j.compfluid.2013.02.021
Tauviqirrahman, M., Ismail, R., Jamari, Schipper, D.J.
Optimization of the complex slip surface and its effect on the hydrodynamic performance of two-dimensional lubricated contacts
(2013) Computers and Fluids, 79, pp. 27-43. Cited 11 times.
Tauviqirrahman, M., Ismail, R., Jamari, J., Schipper, D.J.
Computational analysis of the lubricated-sliding contact with artificial slip boundary
(2013) International Journal of Applied Mathematics and Statistics, 35 (5), pp. 67-80. Cited 1 time.
HTTPS://DOI.ORG/10.1007/s00707-012-0752-7
Tauviqirrahman, M., Ismail, R., Jamari, J., Schipper, D.J.
A study of surface texturing and boundary slip on improving the load support of lubricated parallel sliding contacts
(2013) Acta Mechanica, 224 (2), pp. 365-381. Cited 42 times.
HTTPS://DOI.ORG/10.1016/j.proeng.2013.12.188
Tauviqirrahman, M., Ismail, R., Jamari, J., Schipper, D.J.
Friction reduction in lubricated-MEMS with complex slip surface pattern
(2013) Procedia Engineering, 68, pp. 331-337. Cited 4 times.
HTTPS://DOI.ORG/10.1080/10402004.2013.854943
Tauviqirrahman, M., Muchammad, Jamari, Schipper, D.J.
Numerical study of the load-carrying capacity of lubricated parallel sliding textured surfaces including wall slip
(2013) Tribology Transactions, 57 (1), pp. 134-145. Cited 16 times.
HTTPS://DOI.ORG/10.1016/j.proeng.2013.12.226
Ismail, R., Tauviqirrahman, M., Saputra, E., Jamari, J., Schipper, D.J.
Modeling of repeated rolling contact of rigid ball on rough surface: Residual stress and plastic strain analysis
(2013) Procedia Engineering, 68, pp. 593-599. Cited 3 times.
HTTPS://DOI.ORG/10.1063/1.3667240
Ismail, R., Tauviqirrahman, M., Jamari, Schipper, D.J.
The observation of the steady state phase on rolling contact using finite element analysis
(2011) AIP Conference Proceedings, 1415, pp. 136-139. Cited 2 times.
HTTPS://DOI.ORG/10.1063/1.3667218
Tauviqirrahman, M., Ismail, R., Jamari, J., Schipper, D.J.
Effect of boundary slip on the load support in A lubricated sliding contact
(2011) AIP Conference Proceedings, 1415, pp. 51-54.
HTTPS://DOI.ORG/10.1109/ICA.2011.6130190
Tauviqirrahman, M., Ismail, R., Schipper, D.J., Jamari, J.
Optimization of partial slip surface at lubricated-MEMS
(2011) Proceedings of 2011 2nd International Conference on Instrumentation Control and Automation, ICA 2011, art. no. 6130190, pp. 375-379. Cited 1 time.
HTTPS://DOI.ORG/10.1063/1.3537894
Ismail, R., Tauviqirrahman, M., Jamari, Schipper, D.J.
Two-dimensional finite element analysis on running-in of elastic-plastic rolling contact
(2010) AIP Conference Proceedings, 1325, pp. 190-193. Cited 4 times.
HTTPS://DOI.ORG/10.1063/1.3243255
Ismail, R., Tauviqirrahman, M., Jamari, Schipper, D.J.
New material development for surface layer and surface technology in tribology science to improve energy efficiency
(2009) AIP Conference Proceedings, 1169, pp. 214-221. Cited 2 times.